Exhaust

>>Exhaust
  • Sale!
    FREE SHIPPING IN AUS

    FREE EXPRESS SHIPPING IN AUSTRALIA - USE THE COUPON 'free-ship' AT CHECKOUT TO APPLY

    This Exhaust Cutout Valve, also known as Bi-modal exhaust valve / Exhaust Control Valve (ECV) is great for reducing the sound level of a loud exhaust. For example, if you have twin 2.5" pipes out of your rear muffler you can use this on one of the tips rather than adding additional mufflers in your exhaust system. This valve is for use with turbocharged vehicles and will open that valve when boost reaches roughly 1 BAR / 15 PSI. Allowing a quieter exhaust when driving around normally. Use this exhaust cutout valve in conjunction with our Electric Exhaust Valve Controller allowing you to keep the valve closed even when on boost.
    • Actuator Pressure: ~ 1 BAR / 15 PSI
    • Diameter: 2.5" / 63mm
    • Valve Type: Normally Closed
    • Installation: Weld into exhaust / Plumb boost line from intake
    • Material: Stainless steel 304
  • FREE SHIPPING IN AUS

    FREE EXPRESS SHIPPING IN AUSTRALIA - USE THE COUPON 'free-ship' AT CHECKOUT TO APPLY

    High Temperature Heat Shield Sleeve - AN10 5/8" ID: 16MM - 1M

    Size AN8 5/8” X 1 METER
    QTY 1 PCS = 1 METER
    Usage Insulate / Shield 10mm hose or wire. Perfect for your braided lines in your engine bay.
    Item Type Insulation / Heat Shield
    Item Weight 0.35kg
    Material Type Fiberglass with high temperature silicone rubber outer
    Condition New
    Color Black
    Fit Pipe/ Wire ID size 16mm
    This high temperature heat shield sleeve can prevent or delay hose lines from burning by shielding direct flame. The sleeve is constructed of a uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber.The sleeve protects cables, hoses, tubing and wires from heat, flame or abrasion and will allow continuous operating temperatures from -50 up to 260 degrees Celsius, and short term exposure up to 1,000 degrees Celsius. The silicone coated fiberglass braids keep headers from burning plug wires, battery cables, turbo braided oil and water hoses. They insulate fuel and oil lines and will not burn. Resistant to hydraulic fluids, lubricating oils, and fuels, insulates against energy loss in piping and hosing; and allows "bundling" of wires, hoses, and cables.
  • FREE SHIPPING IN AUS

    FREE EXPRESS SHIPPING IN AUSTRALIA - USE THE COUPON 'free-ship' AT CHECKOUT TO APPLY

    High Temperature Heat Shield Sleeve - AN8 1/2" ID: 13MM - 1M

    Size AN8 1/2” X 1 METER
    QTY 1 PCS = 1 METER
    Usage Insulate / Shield 10mm hose or wire. Perfect for your braided lines in your engine bay.
    Item Type Insulation / Heat Shield
    Item Weight 0.3kg
    Material Type Fiberglass with high temperature silicone rubber outer
    Condition New
    Color Black
    Fit Pipe/ Wire ID size 13mm
    This high temperature heat shield sleeve can prevent or delay hose lines from burning by shielding direct flame. The sleeve is constructed of a uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber.The sleeve protects cables, hoses, tubing and wires from heat, flame or abrasion and will allow continuous operating temperatures from -50 up to 260 degrees Celsius, and short term exposure up to 1,000 degrees Celsius. The silicone coated fiberglass braids keep headers from burning plug wires, battery cables, turbo braided oil and water hoses. They insulate fuel and oil lines and will not burn. Resistant to hydraulic fluids, lubricating oils, and fuels, insulates against energy loss in piping and hosing; and allows "bundling" of wires, hoses, and cables.
  • FREE SHIPPING IN AUS

    FREE EXPRESS SHIPPING IN AUSTRALIA - USE THE COUPON 'free-ship' AT CHECKOUT TO APPLY

    High Temperature Heat Shield Sleeve - AN6 3/8" ID: 10MM - 1M

    Size AN6 3/8” X 1 METER
    QTY 1 PCS = 1 METER
    Usage Insulate / Shield 10mm hose or wire. Perfect for your braided lines in your engine bay.
    Item Type Insulation / Heat Shield
    Item Weight 0.25 kg
    Material Type Fiberglass with high temperature silicone rubber outer
    Condition New
    Color Black
    Fit Pipe/ Wire ID size 10mm
    This high temperature heat shield sleeve can prevent or delay hose lines from burning by shielding direct flame. The sleeve is constructed of a uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber.The sleeve protects cables, hoses, tubing and wires from heat, flame or abrasion and will allow continuous operating temperatures from -50 up to 260 degrees Celsius, and short term exposure up to 1,000 degrees Celsius. The silicone coated fiberglass braids keep headers from burning plug wires, battery cables, turbo braided oil and water hoses. They insulate fuel and oil lines and will not burn. Resistant to hydraulic fluids, lubricating oils, and fuels, insulates against energy loss in piping and hosing; and allows "bundling" of wires, hoses, and cables.
  • FREE SHIPPING IN AUS

    FREE EXPRESS SHIPPING IN AUSTRALIA - USE THE COUPON 'free-ship' AT CHECKOUT TO APPLY

    High Temperature Heat Shield Sleeve - AN4 1/4" ID: 6MM - 1M

    Size AN4 1/4” X 1 METER
    QTY 1 PCS = 1 METER
    Usage Insulate / Shield 6mm hose or wire. Perfect for your braided lines in your engine bay.
    Item Type Insulation / Heat Shield
    Item Weight 0.15 kg
    Material Type Fiberglass with high temperature silicone rubber outer
    Condition New
    Color Black
    Fit Pipe/ Wire ID size 6mm
    This high temperature heat shield sleeve can prevent or delay hose lines from burning by shielding direct flame. The sleeve is constructed of a uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber.The sleeve protects cables, hoses, tubing and wires from heat, flame or abrasion and will allow continuous operating temperatures from -50 up to 260 degrees Celsius, and short term exposure up to 1,000 degrees Celsius. The silicone coated fiberglass braids keep headers from burning plug wires, battery cables, turbo braided oil and water hoses. They insulate fuel and oil lines and will not burn. Resistant to hydraulic fluids, lubricating oils, and fuels, insulates against energy loss in piping and hosing; and allows "bundling" of wires, hoses, and cables.
  • FREE SHIPPING IN AUS

    FREE EXPRESS SHIPPING IN AUSTRALIA - USE THE COUPON 'free-ship' AT CHECKOUT TO APPLY

    High Temperature Sleeve - AN12 3/4" ID: 19MM - 1M

    Size AN12 3/4” X 1 METER
    QTY 1 PCS = 1 METER
    Usage Insulate / Shield 19mm hose or wire. Perfect for your braided lines in your engine bay.
    Item Type Insulation / Heat Shield
    Item Weight 0.5 kg
    Material Type Fiberglass with high temperature silicone rubber outer
    Condition New
    Color Black
    Fit Pipe/ Wire ID size 19mm
      This high temperature heat shield sleeve can prevent or delay hose lines from burning by shielding direct flame. The sleeve is constructed of a uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber.The sleeve protects cables, hoses, tubing and wires from heat, flame or abrasion and will allow continuous operating temperatures from -50 up to 260 degrees Celsius, and short term exposure up to 1,000 degrees Celsius. The silicone coated fiberglass braids keep headers from burning plug wires, battery cables, turbo braided oil and water hoses. They insulate fuel and oil lines and will not burn. Resistant to hydraulic fluids, lubricating oils, and fuels, insulates against energy loss in piping and hosing; and allows "bundling" of wires, hoses, and cables.